Induction Cap 

Induction cap sealing is a non-contact heating process that welds a foil laminate (called an inner-seal) to the lip of jars and bottles. The sealing process takes place after the filling and capping operation. Capped containers pass under an induction cap sealer mounted over a conveyor. The FDA recognizes induction sealing as an effective means of tamper evidence.

Spesifikasi tutup botol induksi :

induction Cap

induction Cap / Tutup Botol Induksi – Tersedia berbagai ukuran dan jenis induction cap menurut kebutuhan anda : Call For Info

The standard system has two main components, the power supply and the sealing head. The power supply is an electrical generator operating at medium to high frequencies. The sealing head is a plastic case that houses a conductor formed into a (inductive) coil. When energized by the power supply, the head produces an electromagnetic current, called an eddy current. When capped the bottles enter this electromagnetic current, the foil of the inner-seal generates electrical resistance, heating the foil. The hot foil in turn melts the polymer coating on the inner-seal. The heat, coupled with the pressure of the cap, causes the inner-seal to bond to the lip of the container. The result is a hermetic seal.

The strength of the power supply depends on the size of the closure and the speed of the production line, while the design of the sealing head depends on the application. The two most common shapes are the flat head and tunnel head. A flat head disperses the magnetic field widely, allowing you to seal a large area. A tunnel head concentrates the magnetic field around the sides and above the cap. It usually provides a more uniform electromagnetic field and thus a more consistent seal.

The inner-seal you choose also depends on the application, and there are several combinations of inner-seal materials, including foam-backed and paper-backed foil laminates. The inner-seals may also include custom-printed logos, trademarks, or other messages, such as “sealed for freshness.” In cases where the inner-seal’s liner is a two-piece construction, the heated foil also melts the wax layer. The wax is absorbed into the inner-seal’s pulp board, thus releasing the foil from the pulp board.

When necessary, the inner-seals are very tenacious, forcing you to destroy them to reach the container’s contents. In other cases the seals are easily peeled. Which inner-seal is right for your product depends on several variables. To find the right inner-seal, we recommend that you consult with your cap supplier or with the inner-seal manufacturers.

Plastic containers with screw-on plastic caps are easiest to seal. Other applications may take a little more work. It is also possible to seal glass containers and to seal with metal caps, but both applications pose challenges. Glass containers may need to be treated before the lip of the container will accept a seal. And while it’s technically feasible, induction sealing with a metal cap requires further consideration. The sealing equipment will heat both the inner-seal foil and the metal cap, and the metal cap will stay hot for a while – presenting a possible safety problem. In fact, hot metal caps could also melt the plastic threads of a container.

  • Lihat juga produk terkait :

Cup Sealer – Mesin Segel Kemasan Gelas – Cup Sealer Otomatis

Mesin Press Plastik – Alat Press Plastik kemasan

Mesin Packing – Jual Mesin Packing Kemasan Terlengkap & Termurah

Plastik Klip – Kemasan Zipper – Plastik Klip Kemasan Zipper Stand Up

Kemasan Kripik – Plastik Kemasan Snack

Hand Sealer – Harga Hand Sealer Termurah